Sectional Contoured Metal Matrices and Accessories


№ 1.0971

Small Sectional Contoured Matrices with Ledge
10 pcs. or 50 pcs. available

There are 4 types of matrices:
• 0,050 mm hard,
• 0,035 mm hard,
• 0,050 mm soft,
• 0,035 mm soft.

Specify, please, the necessary type, e.g., 1.0971 - soft 0,035 mm,
otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.

№ 1.0972

Small Sectional Contoured Matrices
10 pcs. or 50 pcs. available

There are 4 types of matrices:
• 0,050 mm hard,
• 0,035 mm hard,
• 0,050 mm soft,
• 0,035 mm soft.

Specify, please, the necessary type, e.g., 1.0972 - hard 0,035 mm,
otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.

№ 1.0973

Large Sectional Contoured Matrices
10 pcs. or 50 pcs. available

There are 4 types of matrices:
• 0,050 mm hard,
• 0,035 mm hard,
• 0,050 mm soft,
• 0,035 mm soft.

Specify, please, the necessary type, e.g., 1.0973 - soft 0,035 mm,
otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.

№ 1.0974

Large Sectional Contoured Matrices with Ledge
10 pcs. or 50 pcs. available

There are 4 types of matrices:
• 0,050 mm hard,
• 0,035 mm hard,
• 0,050 mm soft,
• 0,035 mm soft.

Specify, please, the necessary type, e.g., 1.0974 - hard 0,035 mm,
otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.

№ 1.0975

Medium Sectional Contoured Matrices with Ledge
10 pcs. or 50 pcs. available

There are 4 types of matrices:
• 0,050 mm hard,
• 0,035 mm hard,
• 0,050 mm soft,
• 0,035 mm soft.

Specify, please, the necessary type, e.g., 1.0975 - hard 0,035 mm,
otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.

№ 1.0976

Medium Sectional Contoured Matrices
10 pcs. or 50 pcs. available

There are 4 types of matrices:
• 0,050 mm hard,
• 0,035 mm hard,
• 0,050 mm soft,
• 0,035 mm soft.

Specify, please, the necessary type, e.g., 1.0976 - hard 0,035 mm,
otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.

№ 1.1972

Small Sectional Contoured Matrices of four types
30 pcs.

• 0,050 mm hard - 10 pcs.
• 0,035 mm hard - 10 pcs.
• 0,050 mm soft - 5 pcs.
• 0,035 mm soft - 5 pcs.

№ 1.1976

Medium Sectional Contoured Matrices of four types
30 pcs.

• 0,050 mm hard - 10 pcs.
• 0,035 mm hard - 10 pcs.
• 0,050 mm soft - 5 pcs.
• 0,035 mm soft - 5 pcs.

№ 1.1973

Large Sectional Contoured Matrices of four types
30 pcs.

• 0,050 mm hard - 10 pcs.
• 0,035 mm hard - 10 pcs.
• 0,050 mm soft - 5 pcs.
• 0,035 mm soft - 5 pcs.

№ 1.097

Set of Sectional Contoured Matrices
15 pcs.

• small with ledge (№ 1.0971) 5 pcs.
• small (№ 1.0972) 10 pcs.
  There are 4 types of matrices:
• 0,050 mm hard,
• 0,035 mm hard,
• 0,050 mm soft,
• 0,035 mm soft.

Specify, please, the necessary type, e.g., 1.097 - hard 0,035 mm, otherwise you' ll
receive matrices of the first type, i.e. hard 0,050 mm.

№ 1.098

Set of Sectional Contoured Matrices
25 pcs.

• small (№ 1.0972) 10 pcs.
• large (№ 1.0973) 10 pcs.
• large with ledge (№ 1.0974) 5 pcs.
  There are 4 types of matrices:
• 0,050 mm hard,
• 0,035 mm hard,
• 0,050 mm soft,
• 0,035 mm soft.

Specify, please, the necessary type, e.g., 1.098 - soft 0,035 mm,
otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.

№ 1.198

Set of Sectional Contoured Matrices
30 pcs.

• small with ledge (№ 1.0971) 3 pcs.
• small (№ 1.0972) 10 pcs.
• large (№ 1.0973) 5 pcs.
• large with ledge (№ 1.0974) 3 pcs.
• medium with ledge (№ 1.0975) 4 pcs.
• medium (№ 1.0976) 5 pcs.
• ring (standard) (№ 1.099) 1 pcs.
  There are 4 types of matrices:
• 0,050 mm hard,
• 0,035 mm hard,
• 0,050 mm soft,
• 0,035 mm soft.

Specify, please, the necessary type, e.g., 1.198 - soft 0,035 mm,
otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.

№ 1.298

Set of Sectional Contoured Matrices
50 pcs.

• small with ledge (№ 1.0971) 5 pcs.
• small (№ 1.0972) 15 pcs.
• large (№ 1.0973) 10 pcs.
• large with ledge (№ 1.0974) 5 pcs.
• medium with ledge (№ 1.0975) 5 pcs.
• medium (№ 1.0976) 10 pcs.
• ring (standard) (№ 1.099) 1 pcs.
  There are 4 types of matrices:
• 0,050 mm hard,
• 0,035 mm hard,
• 0,050 mm soft,
• 0,035 mm soft.

Specify, please, the necessary type, e.g., 1.298 - hard 0,035 mm,
otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.

№ 1.398

Set of Sectional Contoured Matrices
100 pcs.

• small with ledge (№ 1.0971) 10 pcs.
• small (№ 1.0972) 20 pcs.
• large (№ 1.0973) 20 pcs.
• large with ledge (№ 1.0974) 10 pcs.
• medium with ledge (№ 1.0975) 10 pcs.
• medium (№ 1.0976) 30 pcs.
• ring (standard) (№ 1.099) 1 pcs.
• clamp Delta (№ 1.299) 1 pcs.
  There are 4 types of matrices:
• 0,050 mm hard,
• 0,035 mm hard,
• 0,050 mm soft,
• 0,035 mm soft.

Specify, please, the necessary type, e.g., 1.398 - hard 0,035 mm,
otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.

Accessories for installation of sectional matrices

№ 1.099

Rings
• standard ring № 1.099(5) - tines height - 5 mm
• low ring № 1.099(4) - tines height - 4 mm
• high ring № 1.099(6) - tines height - 6 mm


Tines of ring
№ 1.099
Scheme
on tooth

N 1.399

Ring Set
3 pcs.
• low (h = 4 mm) 1 pc.
• medium (h = 5 mm) 1 pc.
• high (h = 6 mm) 1 pc.
  Various jag lengths (h = 4, 5 and 6 mm) allow to apply rings N1.399 simultaneously on two contact points of one tooth.

№ 1.099A

Ring

Ring № 1.099А has the same construction of tines as standard ring № 1.099 for sectional matrices. Addition of extra loop on the ring makes it more flexible and allows to operate in wider range of opening without increase of residual distance between tines after use.
Tines of ring
№ 1.099A
Scheme
on tooth

№ 1.099c

Ring
with silicone safety cover

autoclavable
Tines of ring
№ 1.099c
Scheme
on tooth

№ 1.199

Ring

Tines of ring
№ 1.199
Scheme
on tooth

№ 1.299

Delta Ring

Double tines of Delta ring are suitable for installation of fixing wedges and add-on wedges.
Tines of ring
№ 1.299
Scheme
on tooth

№ 1.299c

Delta Ring

Ledges (shoulders) on Delta ring № 1.299с prevent getting of tongue into operating area.
Tines of ring
№ 1.299c
Scheme
on tooth

№ 1.167

MD-Ring

Tines of MD-ring provide the most non-fluctuating placement with sufficient space for wedge.
Tines of ring
№ 1.167
Scheme
on tooth

№ 1.167c

MD-Ring

Ledges (shoulders) on MD-ring № 1.167с prevent getting of tongue into operating area.
Tines of ring
№ 1.167c
Scheme
on tooth

№ 1.166

D-Ring

Tines of D-ring are curved inwards to fix matrix on distal side of the tooth.
Tines of ring
№ 1.166
Scheme
on tooth

№ 1.177

M-Ring

Tines of M-ring are curved out to fix matrix on mesial side of the tooth.
Tines of ring
№ 1.177
Scheme
on tooth

N 1.099-1

Forceps.

1 pc.

N 1.099-2

Forceps with stoppers.

1 pc.

N 1.099-3

Forceps.

1 pc.

N 1.009

Springclip.

1 pc.

Combines functions of N 1.099 and N 1.099-1.
WARNING!!!
When operating with ring:
1) make sure of integrity of the ring and absence of rust on it;
2) avoid high-speed opening;
3) open the ring for width not more than 10 - 12 mm;
4) open the ring for necessary width outside the mouth before placing it on a tooth.

 

Cleaning and sterilization instructions:


1) Submerge instruments in cleaning agent solution with neutral pH for 20 min;
2) Rinse the instruments thoroughly with purified water for 3-5 min;
3) Perform standard moist heat / steam sterilization procedure following the sterilizer instructions.

to the top

 

TOR VM   www.torvm.ru