Saddle Metal Matrices and Accessories for Installation 
 
 
 
 
 
N 1.310 
Saddle Metal Matrices.18 pcs.:small № 1.311(1)  6 pcs., medium № 1.312(1)  6 pcs., large № 1.313(1)  6 pcs., small springclip № 1.003  1 pc. Matrices are available of two thicknesses  0,050 mm and 0,035 mm. Specify, please, the necessary type, e.g., 1.310  0,035 mm, otherwise you' ll receive matrices of the first type, i.e. 0,050 mm. 

N 1.320 
Saddle Metal Matrices.18 pcs.:small № 1.311(1)  6 pcs., medium № 1.312(1)  6 pcs., large № 1.313(1)  6 pcs., ring № 1.033  1 pc. Matrices are available of two thicknesses  0,050 mm and 0,035 mm. Specify, please, the necessary type, e.g., 1.320  0,035 mm, otherwise you' ll receive matrices of the first type, i.e. 0,050 mm. 

N 1.330 
Saddle Metal Matrices.
36 pcs.: 

N 1.005  Springclip for saddle matrices, large 1 pc. 
N 1.003  Springclip for saddle matrices small 1 pc. 
N 1.033  Ring for saddle matrices. 1 pc. 
N 1.033c  Ring for saddle matrices, with silicone safety cover 1 pc. 
N 1.033A  Ring for saddle matrices 1 pc. 
WARNING!!! When operating with ring: 1) make sure of integrity of the ring and absence of rust on it; 2) avoid highspeed opening; 3) open the ring for width not more than 10  12 mm; 4) open the ring for necessary width outside the mouth before placing it on a tooth.

Cleaning and sterilization instructions:1) Submerge instruments in cleaning agent solution with neutral pH for 20 min; 2) Rinse the instruments thoroughly with purified water for 35 min; 3) Perform standard moist heat / steam sterilization procedure following the sterilizer instructions. 
WARNING!!! 1) Do not use cleaning agents with high percentage of chlorine and cleaners containing oxalic acid; 2) Do not keep instruments in liquid medium for more than 3 hours.
